Description: XK-R2 Woodworking Pocket Hole Jig Set 9.5mm Angle Drill Guide with Pocket Hole Joint Fixed Clamp
XK-R2 Pocket Hole Jig : Color: Black
Material: Aluminum Alloy Drill Hole: 9.5mm Drill Guide: Solid Metal With Scale: Both Inch and mm Scale
Twist Step Drill Bit: Diameter: 9.5mm Length: 158mm Coated: Titanium Coated With Drill Depth Collar and Hex Wrench Key
Screwdriver Bit: Length: 150mm
With 1 Bag Wood Plugs and Screws
Clamp: Material: Chrome Vanadium Steel Black Pin Diameter: 9mm Clamp Range: 25mm-110mm Fit for 9mm, 9.5mm hole(≥9.5mm) pocket hole jionts
1. Laser Engraving Printing (It's not silk screen effect, it won't wear out even use in a long time.) 2. Easy to adjust for materials 15-40mm. 3. Easy to use and install, easy to make a quick repair with XR-R2 jig.
4. Includes pocket hole jig and drill bits, depth collar with hex key, 1 bag of wood plug and screws. 5. Accurate hole drilling, durable and make you a easy work. 6. Pocket hole clamp offer a quick and perfect clamping of pocket hole joints.
7. The clamp fits for 9mm, 9.5mm hole(≥9.5mm) pocket hole jionts. 3. Clamp make it easy and perfect to quick clamp two pieces of wood workpiece.
- The arrow is adjusted according to the thickness of the board to the corresponding degree of engraving.
- Splice the board, use the pull pin, lock the screw.
-The drill bit is inserted into a steel sleeve, raised about 3 mm after touching the bottom of the adjustment block - Then tightly locks the limit ring. - Drill must be sure that the forward rotation, not reverse drilling, drilling at an average speed. - When drilling, the drill bit should be retracted several times to facilitate the removal of wood chips.
- When using a screwdriver, the drill needs to be adjusted to a low speed and high torque file.
1 x XK-R2 pocket hole jig 1 x Pocket Hole Joint Fixed Clamp
2 x Hex wrench
1 x 150mm Screwdriver
1 x 9.5mm Drill Bit 1 x Depth Collar 1 x Bag of Wood Plug and Screws 1 x Box Package