Machifit GM4058-BLDC3650 DC 24V Rated Speed 30RPM Turbo Brushless Motor Worm Geared Reducer Motor
Voltage: DC 24.0V
Retarder Reduction Ratio
No Load Speed(RPM)
No Load Current (mA)
Warning: power plus or minus pole fault, power supply and negative pole touch FG line, will damage the drive board, resulting in damege to the motor
BLDC3650 five line connection mode:
1- black line: power - (blue line is connected to the negative pole motor immediately brake)
2- red wire: power +
3- white line: CW/CCW communication line, the white line and black line connection to change the steering.
4- yellow line: FG signal line output Holzer signal, based on the oulse of a ring signal.
5- blue line: PWM pause width modulatiuon line can be connected to 0-5Vpulse width governor.
BLDC3650 speed regulation connection method:
(Note: speed regulation power supply and motor power supply is indepemdent.)
1- in the PWM speed control interface input amplitude is 5V, the frequency of the PWM signal 10K;
2- when the duty ratio of is less than 10% (2%), trhe motor is in a static state;
3- duty cycle adjustment by 10%~100%, corresponding to the motor speed form the lowest to the highest;
4- connection line is connected to trhe blue PWM governor middle tripod feet;
5- with the motor power supply common ground black motor line- this line must be shared with the motor negative;
6- PWM governor in addiction to one foot must be connected to a separate power supply 0-5V + pole.
- Worm gear motor with self-locking, ie in the absence of electricity in the motor, the output shaft is not to move, that is self-locking.
- Gear output shaft direction of the motor shaft is arranged vertically, the entire body of the motor output shaft relative to the general direction of gear motor short, widely adapted to a number of installation dimensions of this aspect of the requirements of the occasion.
- When you use a motor, can not have bound items, such as adhesives do not flow into the rotary shaft through bearings, and obstruction of the operation of the motor.
- The axis of rotation of the motor's life may have the opposite effect, in order to prolong life, please check whether your load goods according to regulations, can not overload or prejudice the rotation shaft hanging items.
- Manufactured heavy eccentric load of radiation, harmful life of the motor.
- Do not store than four weeks high or extreme humidity, but also do not place in the etching gas, the motor will reduce the effect.
- Do not run the motor in the surrounding temperature and moisture.
1.Please allow a bit error due to manual measurement. please make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.