It can detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, triac etc. It also can detect zener diode and has the function of self-calibration. It can used with infrared decoder to test infrared wave forms. One button operation, automatically detect and shutdown, and you can press the multi-functional button to close the detector. Automatically test the pin of a component, and display on the back light LCD screen.
Type:LCR-T6 Display: 3 x 2.3cm LCD Screen Charging interface: Micro USB Power Mode: Rechargeable Lithium Battery (INCLUDED) Diode Range: < 4.5V Zener Diode:Transistor Detect Area: 0.01-4.5V Zener Diode Detect Area: 0.01-30V Triac Range: IGT < 6mA Capacitance: 25pF-100mF Resistor: 0.01-50MΩ Inductance: 0.01mH-20H Item Size: 9 x 7.6 x 3cm / 3.54 x 2.99 x 1.18inch
How to use: 1.After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form. 2.One button operation, automatically detect and shutdown, and you can press the multi-functional button to close the detector too. 3.Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. 4.Not like the usual black and white display, this detector will show results in color.
Package includeds :
1 x Transistor Tester 1 x Electronic component set