We add sunction tin function on the controller,you can connect the sunction tin handle to the controller directly.
On the back of the controller,it has a sunction tin pump interface.
STM32-OLED digital display T12 soldering station simple instructions
First, the main function of welding station and performance characteristics:
1, temperature range 150 ~ 480C
2, the thermocouple cold junction temperature automatic compensation range -9-99 C (to be more accurate).
3, PID temperature control, temperature stability ± 2 C (no load).
4, can save 5 groups of temperature.
5, can save the temperature of each head calibration parameters, support all types of T12 head, and there are six custom head, can shield the less common head (in the menu tip management allows you to use the head).
6, the automatic standby (time 1-60 minutes can be set).
7, automatic sleep (soft shutdown) (time 1-60 minutes can be set).
8, the latest version 2.1S comes with clock, voltage display, cut-off voltage settings and other functions.
Second, the main operation:
1, under normal circumstances, 1 second continuous counter-clockwise rotation below 3 cells into the standby (default 200 degrees (150-300 degrees can be configured) state, if the set temperature is below 200 degrees directly into sleep.
1.1 Standby state, 1 second continuous counter-clockwise rotation 3 lattice sleep (soft shutdown), sleep (soft shutdown) state, short press the encoder to enter the working state.
1.2 Standby mode, press the encoder or clockwise rotation to restore the working state.
Out of a menu.
2, under normal circumstances, 1 second clockwise rotation 3 consecutive grid into the power to enhance the current temperature +50 degrees (10-200 degrees can be configured), after 5 minutes (1-60 minutes can be set) after the automatic reply, It is also possible to recover the encoder in advance with any operation.
3, under normal circumstances, short press to enter the temperature setting state.
3.1 In the temperature setting state, the temperature of the current setting group can be adjusted by rotary encoder, the default step is 5 degrees (step 1-50 can be set).
3.2 In the temperature setting state, press and hold the rotary encoder and rotate to switch the setting group.
3.3 In the temperature setting state, short press the encoder to save and exit to normal.
4, under normal circumstances, hold down the encoder and clockwise rotation can change the head interface, the interface under the output off, you can live for the implementation of the first operation. You can toggle the header type. And call the relevant head of the more positive curve.
5, under normal circumstances, hold down the encoder and counterclockwise rotation can enter the temperature calibration interface, you can compare the current tip of the parameters, you can restore the default parameters of the correction. Before entering the wizard, you need to restore the default parameters.
6, under normal circumstances, press the encoder for 2 seconds to open the setup menu.