1. Irrigation program setting: (any operation will be performed within 5 seconds)
Step 1: Select the watering frequency by dialing the dial on the left
Step 2: Select the watering time on the right
Example: Set to water for 5 minutes every hour
(1) First dial the right to select the watering time: 5 minutes;
(2) Select the watering frequency from the dial code on the left: 1 hour gear, when the first hour gear is dialed, the indicator light flashes twice, and the water starts to flow for 5 minutes. After 5 minutes, the water stops, and the water is re-irrigated every hour. 5 minutes.
2. Reselect the irrigation frequency:
When I want to change the frequency, I first select the time and then select the frequency range. Every time I change the frequency range, I reset the internal timing.
3. Temporary irrigation:
Dial the code dial on the left to “Reset”, dial the dial on the right to “On” to start watering, and dial to “Off” to close.
4. Program protection:
The time interval must be greater than the watering time, otherwise the machine will not start watering at the time, and this function will also stop when watering. For example: if the frequency is 1 hour and the watering time is 90 minutes, the unsuccessful water will not be discharged. If you start to choose 1 hour to water for 1 minute, when you are watering, the watering time is set to 90 minutes and it will immediately stop watering. The setting is unsuccessful.
1 x Automatic Electronic Water Tap Timer Garden Irrigation Controller