1. Open the switch fiber plate cover and open the plate of the single-core fiber clamp. Confirm the position of the kni-fe holder on the front side
2. Place the fiber in the V-groove of the single-core fiber clamp and align the fiber coating to remove the boundary line and the scale on the fixture, as needed.
3. Cap the clip of the single-core fiber clamp to clamp the fiber. Close the fiber platen cover and push the tool holder inward to cut the fiber
4. Open the fiber-optic panel cover and open the fiber-optic clip while opening the clip of the single-core fiber clamp. Don't forget to remove fiber debris.
Optical power meter
Wavelength range: 800~1700nm
Connector: FC/SC/ST (optional)
Probe type: InGaAs
Power measurement range: -70~+3 or -50~+20
Standard wavelength (nm): 850/1300/1310/1490/1550/1625
Display resolution: linear display: 0.1%, logarithmic display: 0.01dBm
Red light working wavelength (one machine series): 650nm
Red light power (one machine series) (MW): 1, 5, 10, 20, 30 (optional)
Working temperature: -20~+60°C
Storage temperature: -25~+70°C
Automatic shutdown time: 10min
Battery continuous working time: ≥48h
1. Switching machine: press within one second to start, then press this button to shut down
2. AUTO/OFF: Press this button to turn off or turn on the auto power off function. The LCD will display the prompt at the top left corner.
3. ZERO: Press this key to realize automatic clearing, set or set the current test result as reference value, and perform relative power measurement. The display will show the set dBm value
4. LIGHT: This button can turn the backlight on or off, and the LCD will display the prompt at the top left corner.
5. dB: Change the data display unit. The dBm, dB, and nW units can be selected in sequence, and the test data will be displayed in the corresponding structure. The conversion relationship of nW and dBm: 10log(nw)=(dBm)
6. λ: 6 wavelengths can be selected (850nm/1300nm/1310nm/1490nm/1550nm/1625nm). This setting is displayed simultaneously on the LCD.
● High precision cutting kni-fe
● Practical and durable
● A convenient set, full-featured
Application: Fiber Tools
●1 x Optical Fiber Red Light Test Pen
●1 x CFS-2 Duplex Optical Fiber Coating Layer Stripping Pliers